View Relay "TV2573"
Fingerprint: 72E2BE093CE1F9728D41F5E032E6ADD661EF8913 |
Family: 1 relay
|
printerexpert@mail2tor.com |
AS6181
|
United States of America
|
Linux
- Consensus
- Not In Consensus (2/9 Directory Auths, need 5)
- DNS Health
- Not Tested (via exitdnshealth.1aeo.com)
- BW Verified
- 0/6 BW Auths Measured 672 bit/s Median
- Stability
- Not Overloaded | DOWN 1d 5h 46m ago
- Reachability
- IPv4: 2/9 | v6: 0/7 (Directory Auths)
- BW Weight
- 0.00% of Network | 679 Kbit/s Observed By Relay
- Version
- 0.4.8.22 Recommended
Issues Detected:
-
Not in consensus
: Only 2/9 authorities voted for this relay (need 5)
Suggestion: Verify your relay is reachable from multiple geographic locations. Check firewall rules allow incoming connections on your ORPort from all directory authority IP addresses. -
IPv4 reachability issues
: Only 2/9 authorities can reach this relay
Suggestion: Authorities that cannot reach you: bastet, faravahar, gabelmoo, longclaw, maatuska, moria1, tor26. Check: 1) Firewall allows incoming TCP on ORPort, 2) No ISP-level blocking, 3) Tor is running and listening. Use 'nc -zv your-ip your-orport' from external hosts to test. -
IPv6 not reachable
: 0/7 authorities that test IPv6 can reach your IPv6 address
Suggestion: Verify IPv6 is correctly configured: 1) Check ORPort binding includes IPv6 address, 2) Firewall allows IPv6 traffic, 3) IPv6 address is publicly routable. Test with: curl -6 http://ipv6.icanhazip.com/ -
Guard: requires Fast flag
: Guard flag requires having the Fast flag first
Suggestion: Get Fast flag by having bandwidth ≥100 KB/s OR in top 7/8ths of network. Most relays get this easily. -
Guard: requires Stable flag
: Guard flag requires having the Stable flag first
Suggestion: Get Stable flag by maintaining consistent uptime. Stable requires uptime and MTBF at or above network median (typically 2-3 weeks of stable running). -
Guard: bandwidth below threshold
: Observed bandwidth 0.1 MB/s is below 2 MB/s minimum (AuthDirGuardBWGuarantee)
Suggestion: Guard requires ≥2 MB/s bandwidth OR being in top 25% of network. To increase bandwidth: 1) Ensure adequate upstream capacity, 2) Check RelayBandwidthRate/RelayBandwidthBurst in torrc, 3) Monitor with Nyx or ARM. -
Guard: WFU below threshold
: Weighted Fractional Uptime 19.5% is below 98% requirement
Suggestion: WFU measures recent uptime (recent downtime weighs more heavily). To improve: 1) Minimize restarts, 2) Use systemd with Restart=always, 3) Monitor for OOM kills, 4) Schedule updates during low-traffic periods. -
Guard: Time Known below threshold
: Time Known 4.4 days is below 8 days requirement (3.6 more days needed)
Suggestion: Time Known tracks how long authorities have observed your relay. This resets if: 1) Identity key changes, 2) Long downtime makes authorities forget you. Just keep running stably. -
Not eligible for Stable flag
: Uptime or MTBF below network median for most authorities
Suggestion: Stable flag requires uptime/MTBF at or above network median. Keep your relay running continuously for 2-3 weeks. Avoid restarts. Use reliable hardware and network connection. -
HSDir: requires Fast flag
: HSDir flag requires having the Fast flag first
Suggestion: Get Fast flag by having bandwidth ≥100 KB/s OR in top 7/8ths of network. Most relays get this easily. -
HSDir: requires Stable flag
: HSDir flag requires having the Stable flag first
Suggestion: Get Stable flag by maintaining consistent uptime. Stable requires uptime and MTBF at or above network median (typically 2-3 weeks of stable running). Avoid restarts. -
HSDir: WFU below threshold
: WFU 19.5% below 98% required for HSDir
Suggestion: HSDir requires ≥98% WFU, Stable flag, and Time Known ≥25 hours (or ~10 days for moria1). Improve uptime consistency. -
Low bandwidth authority measurements
: Only 0/6 bandwidth authorities measured this relay. Minimum 3 measurements needed for accurate consensus weight.
Suggestion: Low measurement count can indicate connectivity issues. Check: 1) Relay is reachable from multiple geographic locations, 2) ORPort accepts connections from bandwidth scanners, 3) RelayBandwidthRate in torrc matches actual capacity. New relays may take 1-2 days to be measured by all authorities. -
StaleDesc flag assigned
: Relay descriptor is older than 18 hours
Suggestion: Your relay is not publishing fresh descriptors. Check: 1) Tor process is running, 2) Network connectivity, 3) Clock is synchronized (NTP). Restart Tor if needed.
Addresses
- OR Address
-
ip-74-83-17-22.dynamic.fuse.net
74.83.17.22:9001
Reachability (Directory Authorities)
- IPv4
- 2/9
- IPv6
- 0/7 (2 don't test)
Location
- Country
-
United States of America
- Interactive Map
- View in RouteFluxMap
Eligible Flags (0):
Running: 2/9 | Valid: 2/9 | V2Dir: 2/9 | Fast: 0/9 | Stable: 0/9 | HSDir: 0/9 | Guard: 0/9 | Exit: 2/9
Eligibility Flag Vote Details
| Flag | Metric | Status | Relay Value | Threshold Required |
|---|---|---|---|---|
| Running | IPv4 Reachability | Below (2/9 DA) | 2/9 authorities reached relay | ≥5/9 DA ORPort reachable |
| IPv6 Reachability | Below (0/7 DA) | 0/7 tested authorities reached relay | ≥4/7 tested (majority) (≥4/7 DA) | |
| Valid | Descriptor | Partial (2/9 DA) | 2/9 authorities assigned Valid | Not blacklisted + valid descriptor (≥5/9 DA) |
| V2Dir | DirPort Available | Meets (2/9 DA) | Tunnelled: Yes (no DirPort) (R) | Tunnelled directory via ORPort or DirPort (≥5/9 DA) |
| Fast | Speed | Below (0/9 DA) | 679.9 Kbit/s (R) | ≥800.0 Kbit/s (Tor spec minimum) OR top 7/8 (≥5/9 DA) [Stricter] moria1: ≥8.4 Mbit/s |
| Stable | MTBF | Below (0/9 DA) | Median: 0.5d (0/9 DA above threshold) Min/Max: 0.5d / 0.5d (2/9 DA, Voting / Total Eligible) |
≥11.5d - 55.6d (varies) (≥5/9 DA) [Stricter] moria1: ≥356.4d |
| Uptime | Below (0/9 DA) | 1.5d (R) | ≥13.7d - 14.7d (varies) (≥5/9 DA) | |
| HSDir | Prereq: Fast | Below (0/9 DA) | 0/9 DA assigned Fast | ≥800.0 Kbit/s (Tor spec minimum) OR top 7/8 (≥5/9 DA) [Stricter] moria1: ≥8.4 Mbit/s |
| Prereq: Stable | Below (0/9 DA) | 0/9 DA assigned Stable | ≥11.5d - 55.6d (varies) (≥5/9 DA) [Stricter] moria1: ≥356.4d |
|
| Prereq: V2Dir | Below (2/9 DA) | 2/9 DA assigned V2Dir | Tunnelled directory via ORPort or DirPort (≥5/9 DA) | |
| WFU | Below (0/9 DA) | Median: 19.6% (0/9 DA above threshold) Min/Max: 19.5% / 19.7% (2/9 DA, Voting / Total Eligible) |
≥98.0% (≥5/9 DA) | |
| Time Known | Below (2/9 DA) | Median: 4.4d (0/9 DA above threshold) Min/Max: 4.4d / 4.4d (2/9 DA, Voting / Total Eligible) |
≥1.0d (most) (≥5/9 DA) [Stricter] moria1: ≥9.8d |
|
| Guard | Prereq: Fast | Below (0/9 DA) | 0/9 DA assigned Fast | ≥800.0 Kbit/s (Tor spec minimum) OR top 7/8 (≥5/9 DA) [Stricter] moria1: ≥8.4 Mbit/s |
| Prereq: Stable | Below (0/9 DA) | 0/9 DA assigned Stable | ≥11.5d - 55.6d (varies) (≥5/9 DA) [Stricter] moria1: ≥356.4d |
|
| Prereq: V2Dir | Below (2/9 DA) | 2/9 DA assigned V2Dir | Tunnelled directory via ORPort or DirPort (≥5/9 DA) | |
| WFU | Below (0/9 DA) | Median: 19.6% (0/9 DA above threshold) Min/Max: 19.5% / 19.7% (2/9 DA, Voting / Total Eligible) |
≥98% (≥5/9 DA) | |
| Time Known | Below (0/9 DA) (need 3.6 more days) | Median: 4.4d (0/9 DA above threshold) Min/Max: 4.4d / 4.4d (2/9 DA, Voting / Total Eligible) |
≥8 days (≥5/9 DA) | |
| Bandwidth | Below (0/9 DA) | 679.9 Kbit/s (R) | ≥16.0 Mbit/s (Tor spec minimum) OR ≥80.0 Mbit/s-296.0 Mbit/s (≥5/9 DA) | |
| Exit | Exit Policy | Partial (2/9 DA) | Port 80: Yes | Port 443: Yes (R) | Allows ≥1 /8 on ports 80 AND 443 (≥5/9 DA) |
(DA) = Dir. Auth. Measured |
(R) = Relay Reported
Data from Tor CollecTor (authority votes, fetched 2026-03-13 23:45:02).
Capacity (Relay Reported)
- Observed Bandwidth
- 679.94 Kbit/s
- Advertised Bandwidth
- 679.94 Kbit/s
- Rate Limit
- 100.00 Mbit/s
- Burst Limit
- 100.00 Mbit/s
- Total Data
- 186 MB (1 month)
Measurement (Directory Authority Verified)
Source: CollecTor — fetched 2026-03-13 23:45:02
- Measured By
-
0/6
Bandwidth Authorities
Not measured by: bastet, gabelmoo, longclaw, maatuska, moria1, tor26 - Median Measurement
- 672.0 bit/s
- Min / Max
- 672 bit/s / 672 bit/s
Network Participation:
Consensus Weight:
0.0000% of network
(3th pctl)
|
Guard:
N/A |
Middle:
N/A |
Exit:
N/A
Uptime Metrics
- Current Status
- DOWN 1d 5h 46m ago
- Overall Uptime (1M/6M/1Y/5Y)
- 0.0%/0.0%/0.0%/0.0%
- Flag Uptime (1M/6M/1Y/5Y)
- Matches Overall Uptime (0.0%/0.0%/0.0%/0.0%)
- Hibernating
- No
Timestamps
- First Seen
- 4d 22h 46m ago (2026-03-09 01:00:00)
- Last Seen
- 1d 5h 46m ago (2026-03-12 18:00:00)
- Last Restarted
- 1d 12h 8m ago (2026-03-12 11:37:51)
- Last Changed Address
- 2026-03-09 01:00:00
Overload Status:
Not Overloaded — No overload conditions reported.
Operator Identity
Source: AROI Validation API — 2026-03-13 16:00 UTC
- AROI Domain (?)
- Not specified
- Operator Validation
- Unvalidated
- This Relay
- N/A (no AROI configured)
- Contact
- printerexpert@mail2tor.com
Family Configuration
- Family Support
- None — No family membership configured
Happy Families (family-cert)
- Effective Members: 0
- none
MyFamily (legacy declarations)
- Effective Member: 1
72E2BE093CE1F9728D41F5E032E6ADD661EF8913 (this relay)
- Alleged Members: 0
- none
- Indirect Members: 0
- none
IPv4 Exit Policy Summary
accept: 1-65535
IPv6 Exit Policy Summary
NoneFull Exit Policy
reject 0.0.0.0/8:* reject 169.254.0.0/16:* reject 127.0.0.0/8:* reject 192.168.0.0/16:* reject 10.0.0.0/8:* reject 172.16.0.0/12:* reject 74.83.17.22:* accept *:*
Last fetch was at Fri, 13 Mar 2026 23:46:37 GMT.
Data from Tor CollecTor (authority votes, fetched 2026-03-13 23:45:02).
Each cell shows: your measured value | authority threshold. Green = meets, red = below. Flags: green = all authorities agree, yellow = partial.
| Authority | Running | Valid | Exit | MiddleOnly | BW Scan (Authority) |
v4 | v6 | Flags | Fast (Relay|T) | Guard BW (Relay|Threshold) | Guard WFU (M|T) | Guard TK (M|T) | Stable MTBF (M|T) | Stable Uptime (Relay|T) | HSDir WFU (M|T) | HSDir TK (M|T) | Desc Published | Cons Wt (Authority) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| bastet (US) | No | — | — | — | Y | No | — | — | — | — | — | — | — | — | — | — | — | — |
| dannenberg (DE) | Yes | Yes | Yes | — | N | Yes | — | Valid, V2Dir, Exit, StaleDesc | 679.9 Kbit/s | 816.0 Kbit/s | 679.9 Kbit/s | 80.0 Mbit/s OR 16.0 Mbit/s | 19.5% | 98% | 4.4d | 8d | 0.5d | 11.5d | 1.5d | 14.7d | 19.5% | 98.0% | 4.4d | 1.0d | 2026-03-12 22:24:38 [Stale] | 672 bit/s |
| dizum (NL) | Yes | Yes | Yes | — | N | Yes | — | Valid, V2Dir, Exit, StaleDesc | 679.9 Kbit/s | 816.0 Kbit/s | 679.9 Kbit/s | 80.0 Mbit/s OR 16.0 Mbit/s | 19.7% | 98% | 4.4d | 8d | 0.5d | 46.2d | 1.5d | 13.7d | 19.7% | 98.0% | 4.4d | 1.0d | 2026-03-12 22:24:38 [Stale] | 672 bit/s |
| faravahar (US) | No | — | — | — | N | No | — | — | — | — | — | — | — | — | — | — | — | — |
| gabelmoo (DE) | No | — | — | — | Y | No | — | — | — | — | — | — | — | — | — | — | — | — |
| longclaw (US) | No | — | — | — | Y | No | — | — | — | — | — | — | — | — | — | — | — | — |
| maatuska (SE) | No | — | — | — | Y | No | — | — | — | — | — | — | — | — | — | — | — | — |
| moria1 (US) | No | — | — | — | Y | No | — | — | — | — | — | — | — | — | — | — | — | — |
| tor26 (AT) | No | — | — | — | Y | No | — | — | — | — | — | — | — | — | — | — | — | — |
— = not tested/available • Format: relay value | authority threshold • WFU = Weighted Fractional Uptime • TK = Time Known
Bandwidth Values Explained:
Relay Reported = Your relay's self-reported bandwidth from its descriptor (observed_bandwidth). Used for flag eligibility (Guard, Fast).
Authority Measured = Bandwidth measured by authority's sbws scanner. Used for consensus weight (path selection probability).
Why different? Authorities verify your reported bandwidth independently. 6 of 9 authorities run bandwidth scanners; 3 use relay-reported values directly.
Relay Reported = Your relay's self-reported bandwidth from its descriptor (observed_bandwidth). Used for flag eligibility (Guard, Fast).
Authority Measured = Bandwidth measured by authority's sbws scanner. Used for consensus weight (path selection probability).
Why different? Authorities verify your reported bandwidth independently. 6 of 9 authorities run bandwidth scanners; 3 use relay-reported values directly.
Stable Uptime (Two Data Sources):
Relay Uptime = From Onionoo API (last_restarted field). Self-reported uptime from descriptor. Same value for all authorities.
Authority Threshold = From CollecTor vote files (flag-thresholds stable-uptime). Each authority may have different thresholds.
Why two sources? Vote files contain authority thresholds but not per-relay uptime values. Onionoo aggregates relay descriptors which include uptime.
Relay Uptime = From Onionoo API (last_restarted field). Self-reported uptime from descriptor. Same value for all authorities.
Authority Threshold = From CollecTor vote files (flag-thresholds stable-uptime). Each authority may have different thresholds.
Why two sources? Vote files contain authority thresholds but not per-relay uptime values. Onionoo aggregates relay descriptors which include uptime.