View Relay "SCSRelay"

Fingerprint: 6340BEF93C264B61EBB2B5341BF46FB3EE70DE40 | Family: 1 relay | admin@stare.network | AS398924 | United States of America | Linux

Health Status

Consensus
In Consensus (8/9 Directory Auths)
Flags
Running, Valid, Exit (3)
DNS Health
Not Tested (via exitdnshealth.1aeo.com)
BW Verified
0/7 BW Auths Measured 160 Kbit/s Median
Stability
Not Overloaded | UP 2h 49m 16s ago
Reachability
IPv4: 8/9 | v6: 7/8 (Directory Auths)
First Seen
1h 45m 16s ago
BW Weight
0.00% of Network | 1 Mbit/s Observed By Relay
Version
0.4.9.11 Not Recommended
Issues Detected:
  • Not getting the Fast flag : Only 3/9 authorities vote Fast (5 needed). dannenberg, gabelmoo, moria1 and tor26 counted this relay as 0 (no measurement, relay-reported bandwidth ignored). faravahar judged it by bandwidth not shown in the votes.
    Suggestion: Fast requires a bandwidth in the top 7/8 of relays or at least AuthDirFastGuarantee (816.0 Kbit/s by default), judged by each authority. Authorities that have a bandwidth-scanner measurement of your relay judge by it, not by the bandwidth your relay reports. A low measurement means the scanners see your relay underperforming compared with other relays that report a similar speed. Clients only build circuits through Fast relays, so a relay near the threshold can gain and lose most of its traffic from one hourly consensus to the next.
  • Guard: requires Fast flag : Guard flag requires having the Fast flag first
    Suggestion: Fast requires a bandwidth in the top 7/8 of relays or at least AuthDirFastGuarantee (816.0 Kbit/s by default), judged by each authority. Authorities that have a bandwidth-scanner measurement of your relay judge by it, not by the bandwidth your relay reports.
  • Guard: requires Stable flag : Guard flag requires having the Stable flag first
    Suggestion: Get Stable flag by maintaining consistent uptime. Stable requires uptime and MTBF at or above network median (typically 2-3 weeks of stable running).
  • Guard: bandwidth below threshold : 0/9 authorities credit this relay with enough bandwidth for Guard (5 needed): at least 16.8 Mbit/s (AuthDirGuardBWGuarantee) or a place in their top 25% (80.0 Mbit/s – 296.0 Mbit/s). dizum, longclaw and maatuska used the relay-reported 1.2 Mbit/s. dannenberg, gabelmoo, moria1 and tor26 counted this relay as 0 (no measurement, relay-reported bandwidth ignored).
    Suggestion: Guard requires a bandwidth of at least AuthDirGuardBWGuarantee (16.8 Mbit/s by default) or one in the top 25% of relays, judged by each authority the same way as for Fast. To increase bandwidth: 1) Ensure adequate upstream capacity, 2) Check RelayBandwidthRate/RelayBandwidthBurst in torrc, 3) Monitor with Nyx.
  • Guard: WFU below threshold : Weighted Fractional Uptime 1.0% is below 98% requirement
    Suggestion: WFU measures recent uptime (recent downtime weighs more heavily). To improve: 1) Minimize restarts, 2) Use systemd with Restart=always, 3) Monitor for OOM kills, 4) Schedule updates during low-traffic periods.
  • Not eligible for Stable flag : Uptime or MTBF below network median for most authorities
    Suggestion: Stable flag requires uptime/MTBF at or above network median. Keep your relay running continuously for 2-3 weeks. Avoid restarts. Use reliable hardware and network connection.
  • HSDir: requires Fast flag : HSDir flag requires having the Fast flag first
    Suggestion: Fast requires a bandwidth in the top 7/8 of relays or at least AuthDirFastGuarantee (816.0 Kbit/s by default), judged by each authority. Authorities that have a bandwidth-scanner measurement of your relay judge by it, not by the bandwidth your relay reports.
  • HSDir: requires Stable flag : HSDir flag requires having the Stable flag first
    Suggestion: Get Stable flag by maintaining consistent uptime. Stable requires uptime and MTBF at or above network median (typically 2-3 weeks of stable running). Avoid restarts.
  • HSDir: requires V2Dir (tunnelled-dir-server) : HSDir requires the relay to support tunnelled directory requests (V2Dir flag). This relay is missing V2Dir — the descriptor likely does not include tunnelled-dir-server, usually because DirCache 0 is set in torrc.
    Suggestion: Remove DirCache 0 from torrc (DirCache is enabled by default in Tor ≥0.3.3). Restart Tor and verify the descriptor includes tunnelled-dir-server. You can check with: grep tunnelled-dir-server /var/lib/tor/cached-descriptors
  • Low bandwidth authority measurements : Only 0/7 bandwidth authorities measured this relay. Minimum 3 measurements needed for accurate consensus weight.
    Suggestion: Low measurement count can indicate connectivity issues. Check: 1) Relay is reachable from multiple geographic locations, 2) ORPort accepts connections from bandwidth scanners, 3) RelayBandwidthRate in torrc matches actual capacity. New relays may take 1-2 days to be measured by all authorities.
  • Tor version not recommended : Running Tor version 0.4.9.11 which is not on the recommended list.
    Suggestion: Update to the latest stable Tor version. Outdated versions may have security vulnerabilities and could eventually be rejected by the network. See torproject.org/download for latest releases.
Notes:

Connectivity and Location

Addresses
OR Address
mail.stare.network, ns1.stare.network, relay-001.stare.network
142.248.222.1:9001
[2a05:f480:1400:25f6:ec4:7aff:fe8f:6b31]:9001
Reachability (Directory Authorities)
IPv4
8/9
IPv6
7/8 (1 don't test)
Location
Country
United States of America United States of America
Interactive Map
View in RouteFluxMap
Autonomous System
AS Number
AS398924
AS Name
APPBASE.AI INC. (BGP.tools)
AS Rarity
Legendary (score: 5/5, <0.05% consensus weight, 1 operator)

Flags and Eligibility

Current Flags (3): Running, Valid, Exit
Eligible Flags (4): Running: 8/9 | Valid: 8/9 | V2Dir: 8/9 | Fast: 3/9 | Stable: 1/9 | HSDir: 0/9 | Guard: 0/9 | Exit: 8/9
Eligibility Flag Vote Details
Flag Metric Status Relay Value Threshold Required
Running IPv4 Reachability Meets (8/9 DA) 8/9 authorities reached relay ≥5/9 DA ORPort reachable
IPv6 Reachability Meets (7/8 DA) 7/8 tested authorities reached relay ≥5/8 tested (majority) (≥5/8 DA)
Valid Descriptor Meets (8/9 DA) 8/9 authorities assigned Valid Not blacklisted + valid descriptor (≥5/9 DA)
V2Dir DirPort Available Below (0/9 DA) No DirPort, no tunnelled-dir-server (R) Tunnelled directory via ORPort or DirPort (≥5/9 DA)
Fast Speed Below (3/9 DA) 1.2 Mbit/s (3 DA relay-reported)
0 bit/s (4 DA unmeasured, counted as 0)
faravahar: not published		 ≥816.0 Kbit/s (AuthDirFastGuarantee, or the top-7/8 cutoff if lower) (≥5/9 DA)
[Stricter] moria1: ≥8.4 Mbit/s
Stable MTBF Below (0/9 DA) Median: 0.1d (1/9 DA above threshold)
Min/Max: 0.1d / 119.0d (8/9 DA, Voting / Total Eligible)		 ≥5.9d - 8.2d (varies) (≥5/9 DA)
[Stricter] moria1: ≥10670.9d
Uptime Below (0/9 DA) 0.1d (R) ≥5.8d - 6.0d (varies) (≥5/9 DA)
HSDir Prereq: Fast Below (3/9 DA) 3/9 DA assigned Fast
1.2 Mbit/s (3 DA relay-reported)
0 bit/s (4 DA unmeasured, counted as 0)
faravahar: not published		 ≥816.0 Kbit/s (AuthDirFastGuarantee, or the top-7/8 cutoff if lower) (≥5/9 DA)
[Stricter] moria1: ≥8.4 Mbit/s
Prereq: Stable Below (1/9 DA) 1/9 DA assigned Stable ≥5.9d - 8.2d (varies) (≥5/9 DA)
[Stricter] moria1: ≥10670.9d
Prereq: V2Dir Below (0/9 DA) 0/9 DA assigned V2Dir Tunnelled directory via ORPort or DirPort (≥5/9 DA)
Uptime Below (0/9 DA) 0.1d (R) ≥96h as each authority sees it (MinUptimeHidServDirectoryV2) (≥5/9 DA)
[Stricter] moria1: ≥98% WFU and ≥9.9d Time Known
Guard Prereq: Fast Below (3/9 DA) 3/9 DA assigned Fast
1.2 Mbit/s (3 DA relay-reported)
0 bit/s (4 DA unmeasured, counted as 0)
faravahar: not published		 ≥816.0 Kbit/s (AuthDirFastGuarantee, or the top-7/8 cutoff if lower) (≥5/9 DA)
[Stricter] moria1: ≥8.4 Mbit/s
Prereq: Stable Below (1/9 DA) 1/9 DA assigned Stable ≥5.9d - 8.2d (varies) (≥5/9 DA)
[Stricter] moria1: ≥10670.9d
Prereq: V2Dir Below (0/9 DA) 0/9 DA assigned V2Dir Tunnelled directory via ORPort or DirPort (≥5/9 DA)
WFU Below (0/9 DA) Median: 0.2% (0/9 DA above threshold)
Min/Max: 0.2% / 1.0% (8/9 DA, Voting / Total Eligible)		 ≥98% (≥5/9 DA)
Time Known Meets (8/9 DA) Median: 46.8d (8/9 DA above threshold)
Min/Max: 9.8d / 50.5d (8/9 DA, Voting / Total Eligible)		 ≥8 days (≥5/9 DA)
Bandwidth Below (0/9 DA) 1.2 Mbit/s (3 DA relay-reported)
0 bit/s (4 DA unmeasured, counted as 0)
faravahar: not published		 ≥16.8 Mbit/s (AuthDirGuardBWGuarantee) OR top 25% (≥80.0 Mbit/s-296.0 Mbit/s) (≥5/9 DA)
Exit Exit Policy Meets (8/9 DA) Port 80: Yes | Port 443: Yes (R) Allows ≥1 /8 on ports 80 AND 443 (≥5/9 DA)

(DA) = Dir. Auth. Measured | (R) = Relay Reported
Data from Tor CollecTor (authority votes, fetched 2026-10-22 04:45:07).

Bandwidth Metrics

Capacity (Relay Reported)
Observed Bandwidth
1.16 Mbit/s
Advertised Bandwidth
1.16 Mbit/s
Rate Limit
41.94 Mbit/s
Burst Limit
83.89 Mbit/s
Total Data
N/A
Measurement (Directory Authority Verified)

Source: CollecTor — fetched 2026-10-22 04:45:07

Measured By
0/7 Bandwidth Authorities
Not measured by: bastet, dannenberg, faravahar, gabelmoo, longclaw, moria1, tor26
Consensus Weight
160.0 Kbit/s (Unmeasured)
Measured Min / Max
N/A / N/A
Network Participation: Consensus Weight: 0.0000% of network (3th pctl) | Guard: N/A | Middle: N/A | Exit: 0.0000% (2th pctl)

Uptime and Stability

Uptime Metrics
Current Status
UP 2h 49m 16s ago
Overall Uptime (1M/6M/1Y/5Y)
0.0%/0.0%/0.0%/0.0%
Flag Uptime (1M/6M/1Y/5Y)
N/A
Hibernating
No
Timestamps
First Seen
1h 45m 16s ago (2026-10-22 03:00:00)
Last Seen
1h 45m 16s ago (2026-10-22 03:00:00)
Last Restarted
2h 49m 16s ago (2026-10-22 01:56:00)
Last Changed Address
2026-10-22 03:00:00
Overload Status: Not Overloaded — No overload conditions reported.

Operator and Family

Operator Identity

Source: AROI Validation API — 2026-10-21 21:00 UTC

AROI Domain (?)
Not specified
Operator Validation
Unvalidated
This Relay
N/A (no AROI configured)
Contact
admin@stare.network
Family Configuration
Family Support
None — No family membership configured
Happy Families (family-cert)
Effective Members: 0
none
MyFamily (legacy declarations)
Effective Member: 1 
6340BEF93C264B61EBB2B5341BF46FB3EE70DE40 (this relay)
Alleged Members: 0
none
Indirect Members: 0
none

Software and Version

Platform
Linux — Tor 0.4.9.11 on Linux
Version
0.4.9.11 — Not Recommended
Version Status
Obsolete — Update urgently. See torproject.org/download

Exit Health & Policy

DNS Health
Status
Not Tested
Source: exitdnshealth.1aeo.com
IPv4 Exit Policy Summary
accept: 
  80
  443
  8080
  8443
IPv6 Exit Policy Summary
None
Full Exit Policy
reject 0.0.0.0/8:*
reject 169.254.0.0/16:*
reject 127.0.0.0/8:*
reject 192.168.0.0/16:*
reject 10.0.0.0/8:*
reject 172.16.0.0/12:*
reject 142.248.222.1:*
accept *:80
accept *:443
accept *:8080
accept *:8443
reject *:*

Last fetch was at Thu, 22 Oct 2026 04:45:16 GMT.

Consensus Evaluation

Data from Tor CollecTor (authority votes, fetched 2026-10-22 04:45:07).

Per-Authority Details

Each cell shows: your measured value | authority threshold. Green = meets, red = below. Flags: green = all authorities agree, yellow = partial.

Authority Running Valid Exit MiddleOnly BW Scan
(Authority)		 v4 v6 Flags Fast (BW|T) Guard BW (BW|Threshold) Guard WFU (M|T) Guard TK (M|T) Stable MTBF (M|T) Stable Uptime (Relay|T) Desc Published Cons Wt (Authority)
bastet (US) No — — — Y No — — — — — — — — — —
dannenberg (DE) Yes Yes Yes — Y Yes Yes Running, Valid, Exit 0 bit/s (U) | 816.0 Kbit/s 0 bit/s (U) | 296.0 Mbit/s OR 16.8 Mbit/s 1.0% | 98% 37.7d | 8d 0.4d | 5.9d 0.1d | 6.0d 2026-10-22 01:56:02 1.2 Mbit/s (R)
dizum (NL) Yes Yes Yes — N Yes Yes Running, Valid, Fast, Exit 1.2 Mbit/s (R) | 816.0 Kbit/s 1.2 Mbit/s (R) | 80.0 Mbit/s OR 16.8 Mbit/s 0.6% | 98% 40.6d | 8d 0.2d | 7.9d 0.1d | 6.0d 2026-10-22 01:56:02 1.2 Mbit/s (R)
faravahar (US) Yes Yes Yes — Y Yes Yes Running, Valid, Exit not published | 816.0 Kbit/s not published | 280.0 Mbit/s OR 16.8 Mbit/s 0.2% | 98% 47.9d | 8d 0.1d | 8.3d 0.1d | 6.2d 2026-10-22 01:56:02 1.2 Mbit/s (R)
gabelmoo (DE) Yes Yes Yes — Y Yes Yes Running, Valid, Exit 0 bit/s (U) | 816.0 Kbit/s 0 bit/s (U) | 264.0 Mbit/s OR 16.8 Mbit/s 0.2% | 98% 50.5d | 8d 0.1d | 8.1d 0.1d | 6.0d 2026-10-22 01:56:02 1.2 Mbit/s (R)
longclaw (US) Yes Yes Yes — Y Yes — Running, Valid, Fast, Exit 1.2 Mbit/s (R) | 816.0 Kbit/s 1.2 Mbit/s (R) | 80.0 Mbit/s OR 16.8 Mbit/s 0.2% | 98% 48.1d | 8d 0.1d | 8.2d 0.1d | 6.0d 2026-10-22 01:56:02 1.2 Mbit/s (R)
maatuska (SE) Yes Yes Yes — N Yes Yes Running, Valid, Fast, Exit 1.2 Mbit/s (R) | 816.0 Kbit/s 1.2 Mbit/s (R) | 80.0 Mbit/s OR 16.8 Mbit/s 0.2% | 98% 49.8d | 8d 0.1d | 8.0d 0.1d | 6.0d 2026-10-22 01:56:02 1.2 Mbit/s (R)
moria1 (US) Yes Yes Yes — Y Yes Yes Running, Valid, Stable, Exit 0 bit/s (U) | 8.4 Mbit/s 0 bit/s (U) | 200.0 Mbit/s OR 16.8 Mbit/s 0.8% | 98% 9.8d | 8d 119.0d | 10670.9d 0.1d | 5.9d 2026-10-22 01:56:02 1.2 Mbit/s (R)
tor26 (AT) Yes Yes Yes — Y Yes Yes Running, Valid, Exit 0 bit/s (U) | 816.0 Kbit/s 0 bit/s (U) | 280.0 Mbit/s OR 16.8 Mbit/s 0.2% | 98% 45.6d | 8d 0.1d | 8.3d 0.1d | 6.1d 2026-10-22 01:56:02 1.2 Mbit/s (R)

— = not tested/available • Format: relay value | authority threshold • WFU = Weighted Fractional Uptime • TK = Time Known • Bandwidth source: (M) bandwidth-scanner measurement, (R) relay-reported, (U) unmeasured, counted as 0

Bandwidth Values Explained:
Measured (M) = An authority's bandwidth-scanner measurement of your relay (Measured= in its vote). An authority that has one uses it for the Fast and Guard flags, and the consensus weight is the median of these measurements when 3 or more authorities have one.
Relay-reported (R) = The bandwidth your relay advertises: the lower of its observed bandwidth and its rate limit, capped at 10 MB/s (Bandwidth= in every vote). An authority without a measurement uses it for flags, unless it has measurements for enough other relays (ignoring-advertised-bws=1); then your relay counts as 0 (U). It sets the consensus weight only when fewer than 3 authorities measured the relay, capped at 20 KB/s (maxunmeasuredbw) while 3 or more authorities publish measurements.
Not published = The authority has no measurement of your relay in its vote and ignores relay-reported bandwidth, yet it voted Fast or its vote has no measurements at all: it judges your relay by a measurement kept from an earlier bandwidth file (0 if none), which its vote doesn't show.
Why different? A low measurement means the bandwidth scanners see your relay underperforming compared with other relays that report a similar speed. Votes list both values in kilobytes per second. Rules: Assigning flags in a vote, Computing a consensus.
Stable Uptime (Two Data Sources):
Relay Uptime = From Onionoo API (last_restarted field). Self-reported uptime from descriptor. Same value for all authorities.
Authority Threshold = From CollecTor vote files (flag-thresholds stable-uptime). Each authority may have different thresholds.
Why two sources? Vote files contain authority thresholds but not per-relay uptime values. Onionoo aggregates relay descriptors which include uptime.