View Relay "DingBerry"
Fingerprint: 0AE156113CAF79C28EDF599F55FABDE03D5416DC |
Family: 1 relay
|
t(at)randomperson(dot)com |
AS53667
|
United States of America
|
Linux
- Consensus
- Not In Consensus (2/9 Directory Auths, need 5)
- BW Verified
- 1/7 BW Auths Measured 160 Kbit/s Median
- Stability
- Not Overloaded | DOWN 6d 17h 45m ago | UP 77% (1M)
- Reachability
- IPv4: 2/9 | v6: 0/7 (Directory Auths)
- BW Weight
- 0.00% of Network | 679 Kbit/s Observed By Relay
- Version
- 0.4.9.6 Not Recommended
Issues Detected:
-
Not in consensus
: Only 2/9 authorities voted for this relay (need 5)
Suggestion: Verify your relay is reachable from multiple geographic locations. Check firewall rules allow incoming connections on your ORPort from all directory authority IP addresses. -
IPv4 reachability issues
: Only 2/9 authorities can reach this relay
Suggestion: Authorities that cannot reach you: bastet, faravahar, gabelmoo, longclaw, maatuska, moria1, tor26. Check: 1) Firewall allows incoming TCP on ORPort, 2) No ISP-level blocking, 3) Tor is running and listening. Use 'nc -zv your-ip your-orport' from external hosts to test. -
IPv6 not reachable
: 0/7 authorities that test IPv6 can reach your IPv6 address
Suggestion: Verify IPv6 is correctly configured: 1) Check ORPort binding includes IPv6 address, 2) Firewall allows IPv6 traffic, 3) IPv6 address is publicly routable. Test with: curl -6 http://ipv6.icanhazip.com/ -
Not getting the Fast flag
: Only 0/9 authorities vote Fast (5 needed). dannenberg measured this relay at 672.0 Kbit/s, below the Fast threshold (816.0 Kbit/s). dizum used the relay-reported 672.0 Kbit/s, below the Fast threshold (816.0 Kbit/s).
Suggestion: Fast requires a bandwidth in the top 7/8 of relays or at least AuthDirFastGuarantee (816.0 Kbit/s by default), judged by each authority. Authorities that have a bandwidth-scanner measurement of your relay judge by it, not by the bandwidth your relay reports. A low measurement means the scanners see your relay underperforming compared with other relays that report a similar speed. Clients only build circuits through Fast relays, so a relay near the threshold can gain and lose most of its traffic from one hourly consensus to the next. -
Guard: requires Fast flag
: Guard flag requires having the Fast flag first
Suggestion: Fast requires a bandwidth in the top 7/8 of relays or at least AuthDirFastGuarantee (816.0 Kbit/s by default), judged by each authority. Authorities that have a bandwidth-scanner measurement of your relay judge by it, not by the bandwidth your relay reports. -
Guard: bandwidth below threshold
: 0/9 authorities credit this relay with enough bandwidth for Guard (5 needed): at least 16.8 Mbit/s (AuthDirGuardBWGuarantee) or a place in their top 25% (80.0 Mbit/s – 280.0 Mbit/s). dannenberg measured this relay at 672.0 Kbit/s. dizum used the relay-reported 672.0 Kbit/s.
Suggestion: Guard requires a bandwidth of at least AuthDirGuardBWGuarantee (16.8 Mbit/s by default) or one in the top 25% of relays, judged by each authority the same way as for Fast. To increase bandwidth: 1) Ensure adequate upstream capacity, 2) Check RelayBandwidthRate/RelayBandwidthBurst in torrc, 3) Monitor with Nyx. -
HSDir: requires Fast flag
: HSDir flag requires having the Fast flag first
Suggestion: Fast requires a bandwidth in the top 7/8 of relays or at least AuthDirFastGuarantee (816.0 Kbit/s by default), judged by each authority. Authorities that have a bandwidth-scanner measurement of your relay judge by it, not by the bandwidth your relay reports. -
HSDir: requires V2Dir (tunnelled-dir-server)
: HSDir requires the relay to support tunnelled directory requests (V2Dir flag). This relay is missing V2Dir — the descriptor likely does not include
tunnelled-dir-server, usually becauseDirCache 0is set in torrc.
Suggestion: RemoveDirCache 0from torrc (DirCache is enabled by default in Tor ≥0.3.3). Restart Tor and verify the descriptor includestunnelled-dir-server. You can check with:grep tunnelled-dir-server /var/lib/tor/cached-descriptors -
Low bandwidth authority measurements
: Only 1/7 bandwidth authorities measured this relay. Minimum 3 measurements needed for accurate consensus weight.
Suggestion: Low measurement count can indicate connectivity issues. Check: 1) Relay is reachable from multiple geographic locations, 2) ORPort accepts connections from bandwidth scanners, 3) RelayBandwidthRate in torrc matches actual capacity. New relays may take 1-2 days to be measured by all authorities. -
Tor version not recommended
: Running Tor version 0.4.9.6 which is not on the recommended list.
Suggestion: Update to the latest stable Tor version. Outdated versions may have security vulnerabilities and could eventually be rejected by the network. See torproject.org/download for latest releases.
Addresses
- OR Address
- 198.98.61.60:9001
Reachability (Directory Authorities)
- IPv4
- 2/9
- IPv6
- 0/7 (2 don't test)
Location
- Country
-
United States of America
- Interactive Map
- View in RouteFluxMap
Eligible Flags (0):
Running: 2/9 | Valid: 2/9 | V2Dir: 2/9 | Fast: 0/9 | Stable: 2/9 | HSDir: 0/9 | Guard: 0/9 | Exit: 1/9
Eligibility Flag Vote Details
| Flag | Metric | Status | Relay Value | Threshold Required |
|---|---|---|---|---|
| Running | IPv4 Reachability | Below (2/9 DA) | 2/9 authorities reached relay | ≥5/9 DA ORPort reachable |
| IPv6 Reachability | Below (0/7 DA) | 0/7 tested authorities reached relay | ≥4/7 tested (majority) (≥4/7 DA) | |
| Valid | Descriptor | Partial (2/9 DA) | 2/9 authorities assigned Valid | Not blacklisted + valid descriptor (≥5/9 DA) |
| V2Dir | DirPort Available | Below (1/9 DA) | No DirPort, no tunnelled-dir-server (R) | Tunnelled directory via ORPort or DirPort (≥5/9 DA) |
| Fast | Speed | Below (0/9 DA) | 672.0 Kbit/s (1 DA measured) 672.0 Kbit/s (1 DA relay-reported) |
≥816.0 Kbit/s (AuthDirFastGuarantee, or the top-7/8 cutoff if lower) (≥5/9 DA) [Stricter] moria1: ≥8.4 Mbit/s |
| Stable | MTBF | Below (2/9 DA) | Median: 19.9d (2/9 DA above threshold) Min/Max: 18.7d / 21.1d (2/9 DA, Voting / Total Eligible) |
≥5.1d - 10.9d (varies) (≥5/9 DA) [Stricter] moria1: ≥8990.4d |
| Uptime | Meets (9/9 DA) | 5.3d (R) | ≥3.2d - 3.2d (varies) (≥5/9 DA) | |
| HSDir | Prereq: Fast | Below (0/9 DA) | 0/9 DA assigned Fast 672.0 Kbit/s (1 DA measured) 672.0 Kbit/s (1 DA relay-reported) |
≥816.0 Kbit/s (AuthDirFastGuarantee, or the top-7/8 cutoff if lower) (≥5/9 DA) [Stricter] moria1: ≥8.4 Mbit/s |
| Prereq: Stable | Below (2/9 DA) | 2/9 DA assigned Stable | ≥5.1d - 10.9d (varies) (≥5/9 DA) [Stricter] moria1: ≥8990.4d |
|
| Prereq: V2Dir | Below (1/9 DA) | 1/9 DA assigned V2Dir | Tunnelled directory via ORPort or DirPort (≥5/9 DA) | |
| WFU | Meets (2/9 DA) | Median: 100.0% (2/9 DA above threshold) Min/Max: 99.9% / 100.0% (2/9 DA, Voting / Total Eligible) |
≥98.0% (≥5/9 DA) | |
| Time Known | Below (2/9 DA) | Median: 24.7d (2/9 DA above threshold) Min/Max: 24.3d / 25.0d (2/9 DA, Voting / Total Eligible) |
≥1.0d (most) (≥5/9 DA) [Stricter] moria1: ≥10.0d |
|
| Guard | Prereq: Fast | Below (0/9 DA) | 0/9 DA assigned Fast 672.0 Kbit/s (1 DA measured) 672.0 Kbit/s (1 DA relay-reported) |
≥816.0 Kbit/s (AuthDirFastGuarantee, or the top-7/8 cutoff if lower) (≥5/9 DA) [Stricter] moria1: ≥8.4 Mbit/s |
| Prereq: Stable | Below (2/9 DA) | 2/9 DA assigned Stable | ≥5.1d - 10.9d (varies) (≥5/9 DA) [Stricter] moria1: ≥8990.4d |
|
| Prereq: V2Dir | Below (1/9 DA) | 1/9 DA assigned V2Dir | Tunnelled directory via ORPort or DirPort (≥5/9 DA) | |
| WFU | Meets (2/9 DA) | Median: 100.0% (2/9 DA above threshold) Min/Max: 99.9% / 100.0% (2/9 DA, Voting / Total Eligible) |
≥98% (≥5/9 DA) | |
| Time Known | Meets (2/9 DA) | Median: 24.7d (2/9 DA above threshold) Min/Max: 24.3d / 25.0d (2/9 DA, Voting / Total Eligible) |
≥8 days (≥5/9 DA) | |
| Bandwidth | Below (0/9 DA) | 672.0 Kbit/s (1 DA measured) 672.0 Kbit/s (1 DA relay-reported) |
≥16.8 Mbit/s (AuthDirGuardBWGuarantee) OR top 25% (≥80.0 Mbit/s-280.0 Mbit/s) (≥5/9 DA) | |
| Exit | Exit Policy | Partial (1/9 DA) | Port 80: Yes | Port 443: Yes (R) | Allows ≥1 /8 on ports 80 AND 443 (≥5/9 DA) |
| MiddleOnly | Restriction (by DA) | Flagged (1/9 DA) | 1/9 authorities assigned MiddleOnly | Suspicious behavior, Sybil risk, or policy violation |
(DA) = Dir. Auth. Measured |
(R) = Relay Reported
Data from Tor CollecTor (authority votes, fetched 2026-10-12 09:45:05).
Capacity (Relay Reported)
- Observed Bandwidth
- 679.94 Kbit/s
- Advertised Bandwidth
- 679.94 Kbit/s
- Rate Limit
- 6.29 Mbit/s
- Burst Limit
- 8.39 Mbit/s
- Total Data
-
11 TB
(5 years)
1mo: 2.6 TB | 6mo: 6.1 TB | 1y: 7.3 TB | 5y: 11 TB
Measurement (Directory Authority Verified)
Source: CollecTor — fetched 2026-10-12 09:45:05
- Measured By
-
1/7
Bandwidth Authorities
Not measured by: bastet, faravahar, gabelmoo, longclaw, moria1, tor26 - Consensus Weight
- 160.0 Kbit/s (Unmeasured)
- Measured Min / Max
- 672.0 Kbit/s / 672.0 Kbit/s
Network Participation:
Consensus Weight:
0.0000% of network
(5th pctl)
|
Guard:
N/A |
Middle:
N/A |
Exit:
N/A
Uptime Metrics
- Current Status
- DOWN 6d 17h 45m ago
- Overall Uptime (1M/6M/1Y/5Y)
- 77.8%/84.4%/62.1%/74.1%
- Flag Uptime (1M/6M/1Y/5Y)
- Matches Overall Uptime (77.8%/84.4%/62.1%/74.1%)
- Hibernating
- No
Timestamps
- First Seen
- 1y 4mo 3w ago (2025-05-17 12:00:00)
- Last Seen
- 6d 17h 45m ago (2026-10-05 16:00:00)
- Last Restarted
- 5d 6h 3m ago (2026-10-07 03:41:43)
- Last Changed Address
- 2026-05-03 17:00:00
Overload Status:
Not Overloaded — No overload conditions reported.
Operator Identity
Source: AROI Validation API — 2026-10-12 02:00 UTC
- AROI Domain (?)
- Not specified
- Operator Validation
- Unvalidated
- This Relay
- N/A (no AROI configured)
- Contact
- t(at)randomperson(dot)com
Family Configuration
- Family Support
- None — No family membership configured
Happy Families (family-cert)
- Effective Members: 0
- none
MyFamily (legacy declarations)
- Effective Member: 1
0AE156113CAF79C28EDF599F55FABDE03D5416DC (this relay)
- Alleged Members: 0
- none
- Indirect Members: 0
- none
- Platform
- Linux — Tor 0.4.9.13 on Linux
- Version
- 0.4.9.6 — Not Recommended
- Version Status
- Obsolete — Update urgently. See torproject.org/download
DNS Health
Not an exit relay — DNS health testing does not apply.IPv4 Exit Policy Summary
reject: 25 119 135-139 445 465 563 587 993 995 1214 4661-4666 6346-6429 6699 6881-6999
IPv6 Exit Policy Summary
NoneFull Exit Policy
reject 0.0.0.0/8:* reject 169.254.0.0/16:* reject 127.0.0.0/8:* reject 192.168.0.0/16:* reject 10.0.0.0/8:* reject 172.16.0.0/12:* reject 198.98.61.60:* reject *:25 reject *:465 reject *:587 reject *:993 reject *:995 reject *:119 reject *:135-139 reject *:445 reject *:563 reject *:1214 reject *:4661-4666 reject *:6346-6429 reject *:6699 reject *:6881-6999 accept *:*
Last fetch was at Mon, 12 Oct 2026 09:45:19 GMT.
Data from Tor CollecTor (authority votes, fetched 2026-10-12 09:45:05).
Each cell shows: your measured value | authority threshold. Green = meets, red = below. Flags: green = all authorities agree, yellow = partial.
| Authority | Running | Valid | Exit | MiddleOnly | BW Scan (Authority) |
v4 | v6 | Flags | Fast (BW|T) | Guard BW (BW|Threshold) | Guard WFU (M|T) | Guard TK (M|T) | Stable MTBF (M|T) | Stable Uptime (Relay|T) | HSDir WFU (M|T) | HSDir TK (M|T) | Desc Published | Cons Wt (Authority) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| bastet (US) | No | — | — | — | Y | No | — | — | — | — | — | — | — | — | — | — | — | — |
| dannenberg (DE) | Yes | Yes | No | Yes | Y | Yes | — | Running, Valid, Stable, MiddleOnly | 672.0 Kbit/s (M) | 816.0 Kbit/s | 672.0 Kbit/s (M) | 280.0 Mbit/s OR 16.8 Mbit/s | 99.9% | 98% | 24.3d | 8d | 18.7d | 5.1d | 5.3d | 3.2d | 99.9% | 98.0% | 24.3d | 1.0d | 2026-10-12 07:50:59 | 672.0 Kbit/s (R) |
| dizum (NL) | Yes | Yes | Yes | — | N | Yes | — | Running, Valid, V2Dir, Stable, Exit | 672.0 Kbit/s (R) | 816.0 Kbit/s | 672.0 Kbit/s (R) | 80.0 Mbit/s OR 16.8 Mbit/s | 100.0% | 98% | 25.0d | 8d | 21.1d | 10.9d | 5.3d | 3.2d | 100.0% | 98.0% | 25.0d | 1.0d | 2026-10-12 07:50:59 | 672.0 Kbit/s (R) |
| faravahar (US) | No | — | — | — | Y | No | — | — | — | — | — | — | — | — | — | — | — | — |
| gabelmoo (DE) | No | — | — | — | Y | No | — | — | — | — | — | — | — | — | — | — | — | — |
| longclaw (US) | No | — | — | — | Y | No | — | — | — | — | — | — | — | — | — | — | — | — |
| maatuska (SE) | No | — | — | — | N | No | — | — | — | — | — | — | — | — | — | — | — | — |
| moria1 (US) | No | — | — | — | Y | No | — | — | — | — | — | — | — | — | — | — | — | — |
| tor26 (AT) | No | — | — | — | Y | No | — | — | — | — | — | — | — | — | — | — | — | — |
— = not tested/available • Format: relay value | authority threshold • WFU = Weighted Fractional Uptime • TK = Time Known • Bandwidth source: (M) bandwidth-scanner measurement, (R) relay-reported, (U) unmeasured, counted as 0
Bandwidth Values Explained:
Measured (M) = An authority's bandwidth-scanner measurement of your relay (
Relay-reported (R) = The bandwidth your relay advertises: the lower of its observed bandwidth and its rate limit, capped at 10 MB/s (
Not published = The authority has no measurement of your relay in its vote and ignores relay-reported bandwidth, yet it voted Fast or its vote has no measurements at all: it judges your relay by a measurement kept from an earlier bandwidth file (0 if none), which its vote doesn't show.
Why different? A low measurement means the bandwidth scanners see your relay underperforming compared with other relays that report a similar speed. Votes list both values in kilobytes per second. Rules: Assigning flags in a vote, Computing a consensus.
Measured (M) = An authority's bandwidth-scanner measurement of your relay (
Measured= in its vote). An authority that has one uses it for the Fast and Guard flags, and the consensus weight is the median of these measurements when 3 or more authorities have one.Relay-reported (R) = The bandwidth your relay advertises: the lower of its observed bandwidth and its rate limit, capped at 10 MB/s (
Bandwidth= in every vote). An authority without a measurement uses it for flags, unless it has measurements for enough other relays (ignoring-advertised-bws=1); then your relay counts as 0 (U). It sets the consensus weight only when fewer than 3 authorities measured the relay, capped at 20 KB/s (maxunmeasuredbw) while 3 or more authorities publish measurements.Not published = The authority has no measurement of your relay in its vote and ignores relay-reported bandwidth, yet it voted Fast or its vote has no measurements at all: it judges your relay by a measurement kept from an earlier bandwidth file (0 if none), which its vote doesn't show.
Why different? A low measurement means the bandwidth scanners see your relay underperforming compared with other relays that report a similar speed. Votes list both values in kilobytes per second. Rules: Assigning flags in a vote, Computing a consensus.
Stable Uptime (Two Data Sources):
Relay Uptime = From Onionoo API (last_restarted field). Self-reported uptime from descriptor. Same value for all authorities.
Authority Threshold = From CollecTor vote files (flag-thresholds stable-uptime). Each authority may have different thresholds.
Why two sources? Vote files contain authority thresholds but not per-relay uptime values. Onionoo aggregates relay descriptors which include uptime.
Relay Uptime = From Onionoo API (last_restarted field). Self-reported uptime from descriptor. Same value for all authorities.
Authority Threshold = From CollecTor vote files (flag-thresholds stable-uptime). Each authority may have different thresholds.
Why two sources? Vote files contain authority thresholds but not per-relay uptime values. Onionoo aggregates relay descriptors which include uptime.